Roller containers type 1570 according to DIN30722-1

Send your inquiry

Roller containers / hook containers with a capacity of up to 40m³. Internal length from 4,00m to 7,20m.

Standard design in accordance with DIN 30722-1.

It is possible to adapt it to loading with a rope and chain system. At the customer’s request, execution in accordance with the standards: SS3021, NF R17-108 or SFS4417.

Standard version:

front wall, hook and hook reinforcement made strictly according to DIN 30722-1
height of the hook 1570mm
sheet: bottom 4/5/6mm, sides 3/4mm
upper frame: pipe 88.9x6mm, closed section 80×80 or 90×90 in the wall, min. 5mm
side reinforcements: C-profile 80x50x3/4mm
frame spacing: 750mm
the last frame is made of the UPN160 channel section
additional reinforcement of the side walls in 1/2 – 2/3 height of the container
additional horizontal reinforcements of the floor between the frames
skids: IPN180 I-beam
skid spacing: 1060mm
vertical reinforcement of the skids and protections according to DIN 30722-1
door that opens to the sides with a triple security system (left leaf, right leaf with a pulling mechanism and central lock)
rolls with a diameter of 159/168mm and a width of 300mm
ladder on the front wall of the container
hooks for the net / tarpaulin around the perimeter
all moving parts are equipped with grease nipples
all welds are continuously welded

Load capacity: 16,000 kg

surface cleaned mechanically and degreased before painting
primer and topcoat based on alkyd resins in any color from the RAL palette, applied with the AIRLESS AIRMIX hydrodynamic method

made of wear-resistant and high-strength sheets: HARDOX / DOMEX / RAEX
hinged flap up
single sash opens to the side
sealed version
polyamide rollers or rubber / polyurethane coated
crane / crane hooks
additional ribbing of the bottom / side walls
the possibility of making containers of any thickness of sheet metal and in other versions of development
side rolled tarpaulin